Access control

Access control function checks the cloud.atomrock.com visitor’s login IP address and its origin, then decide it can be allowed or not into the system. The setting will affect company-wide login.

There are two ways to control the access, IP list and/or allowed countries. When both features are enabled, the system will check the IP list first and decide to allow or block IP address. If there is no match, then the system will check the IP address’ origin and decide if its origin country is in the allowed list.

IP list

User can select either block or allow (single select) up to 128 entries of IP or range of IP address.

• a. Allow – Allow only the IP listed below to login
  
  
• b. Block – block the IP or IP range listed below to login
  
  

Allowed country

Select list of the countries that is allowed to login. It can be multiple countries.

Note: The format of the IP address range is [IP]/[subnet mask bit]. IP format is n.n.n.n, the ‘n’ number must be between numeric between 0 to 255. Subnet mask bit is used to determine range of the IP address, must be numeric number between 0 to 32. For example, block or allow single IP address of 1.2.3.4 will be 1.2.3.4/32, block or allow range of IP address of 123.45.67.0 to 123.45.67.255 will be 123.45.67.0/24.